*

The ELx808™ Incubating Microplate Reader can be used with Pyrochrome® lysate, Chromo-LAL lysate, or Pyrotell®-T lysate to perform chromogenic or turbidimetric assays. Software is sold separately. A computer is required. This multi-channel incubating reader offers enhanced uniformity through independently monitored natural convection heaters and 4-zone temperature control for improved reproducibility in kinetic enzyme reactions. Additional Features: » Programmable and variable shaking speed » End-point, Kinetic and Well-Scanning capabilities » On-board data analysis, including curve-fitting The detection limit depends on the protocol and reagent employed. A Sensitivity as low as 0.005 EU/mL may be achieved with Pyrochrome lysate, Chromo-LAL lysate, and Pyrotell-T lysate. *Trademark of Bio-Tek Instruments, Inc.

ELx808 Microplate Reader #PPS04   Incubating Microplate Reader and Operations Manual #ELXP     Universal Test Plate for ELx808

System Specifications

Capacity:	1 Microplate, 96-well
Power Requirement:	100-240 V, 50/60 Hz
Fuse:	120 VAC: 1.5 amp slo blo 240 VAC: 0.63 amp slo blo 5 X 20 mm
Light Source:	Tungsten halogen bulb
Filter Configuration:	340, 405, 490, 540 and 630 nm
Dimensions:	16 d x 15.5 w x 8.75 h in. (40.6 x 39.4 x 22.2 cm)
Weight:	30 lbs. (13.6 kg)
Temperature Range:	4°C above ambient to 50°C, Well-to-well uniformity ± 0.5°C
Data Interface:	25-Pin RS232 port
Data Transmission Format:	ASCII character strings, 9600 baud
Registration:	CE Mark, ETL Mark for UL3101-1, CAN/CSA C22.2 No. 1010.1, Conforms to IEC 1010-1